Ryobi 18V ONE+ Grease Gun P3410 Review: Worth It? (November 2026)
The Ryobi P3410 is a strong fit for ONE+ owners who want a cordless grease gun with 10,000 PSI and a 30 in hose. This Ryobi 18V grease gun review favors the tool-only model if you have a compatible battery and charger, and the kit if you do not.
On this page (9 sections)
- Is the Ryobi 18V grease gun a good fit?
- What should you check before choosing a cordless grease gun?
- What do the P3410 pressure and flow figures mean?
- How should you set up the Ryobi grease gun?
- Does the 30 in hose reach your fittings?
- What common mistakes interrupt grease flow?
- How does the P3410 compare with Milwaukee and DeWalt?
- Should you choose the tool-only P3410 or the kit?
- How do you decide if the Ryobi 18V grease gun is right?
The Ryobi 18V grease gun review comes down to battery fit, hose reach and how often you grease equipment. The P3410 suits ONE+ owners who want cordless dispensing, a 30 in hose and a stated maximum pressure of 10,000 PSI.
Its stated flow rate is up to 7.5 oz./minute. Choose the tool-only model if you already have a compatible battery and charger; look at the kit if you need those items.
Is the Ryobi 18V grease gun a good fit?
The Ryobi P3410 is a good fit for regular maintenance when you already use the 18V ONE+ battery platform. Its hose, work light and powered pump can help with fittings tucked into equipment or positioned awkwardly.
Ryobi P3410 18V ONE+ Grease Gun: Best for ONE+ owners
- 10,000 PSI maximum pressure
- Up to 7.5 oz./minute flow rate
- 30 in flexible hose
- On-board LED work light
A cordless option for people already using Ryobi ONE+ batteries. The tool-only package means battery and charger are sold separately.
Pros
- High stated maximum pressure
- Fast stated flow rate
- Flexible hose reaches tight areas
- On-board LED and hose storage
Cons
- Battery and charger are sold separately
- 30 in hose is shorter than the DeWalt's 42 in hose
The P3410 has a steel grease tube, on-board hose storage and plunger rod markings that help you gauge how much grease remains. Its air bleeder valve helps prime the pump, and the lock-on/lock-off trigger gives you two ways to manage dispensing.
At 8.3 lb before adding a battery and grease, it is a substantial tool to hold. Think about how long each maintenance round takes and whether you can rest the gun between fittings.
Who should buy the Ryobi P3410?
Buy the P3410 if you already own compatible ONE+ batteries, service several grease fittings in a session, and can reach your equipment with a 30 in hose. The LED can help you see fittings in dim work areas.
Skip the tool-only version if you need a battery and charger, or if a 30 in hose will not reach your farthest fittings from a stable position. Compare the kit or a longer-hose alternative before deciding.
What should you check before choosing a cordless grease gun?
Choose by battery platform first, then match hose reach and handling to the equipment you service. Maximum pressure is useful to compare, but it does not replace the correct grease, fitting and maintenance procedure.
If you already have ONE+ batteries, the P3410 tool-only model avoids buying another power setup. If you are starting without compatible batteries, the P3410 kit includes a 1.3 Ah battery and charger, though their style may vary.
Measure from a place where you can hold the tool steadily to the fitting farthest from you. Leave enough room to connect the coupler straight and move the hose without kinking it.
A longer hose may help on larger equipment, while a shorter one can be easier to manage in a tight work area. Also consider how frequently you grease fittings: powered dispensing can be useful across a maintenance round, while a manual gun may be enough for occasional jobs.
What do the P3410 pressure and flow figures mean?
The P3410's stated maximums are 10,000 PSI and 7.5 oz./minute. They describe the tool's upper output figures, not the amount of grease every fitting needs.
Use short, controlled trigger pulls and follow the equipment maker's maintenance instructions. Too much grease can be a problem for a small bearing, so stop when the recommended amount has been delivered.
A high pressure figure does not mean you should force grease into a blocked fitting. Check for a damaged or plugged zerk and clean or replace it as needed.
For more context, read our guide to how much PSI a grease gun makes. If grease will not enter a fitting, see why a grease zerk won't take grease.
How should you set up the Ryobi grease gun?
Start by loading the cartridge according to the manual, securing the tube and checking that the coupler is clean. After a cartridge change, use the air bleeder valve and the manual's priming steps if the pump does not move grease right away.
Connect the coupler straight onto a clean fitting so it seats firmly. Keep the hose from twisting or kinking, then use short trigger pulls while watching how grease enters the joint.
The plunger rod markings can help you see how much grease remains before you begin a group of fittings. That makes it easier to plan a cartridge change instead of stopping partway through the job.
If the tool runs without dispensing after a cartridge change, trapped air may be the cause. Follow our guide to bleeding air out of a grease gun for a careful priming routine.
Does the 30 in hose reach your fittings?
The P3410's 30 in flexible hose suits fittings that sit behind or beside parts, provided you can hold the gun at a safe, stable angle. Measure the distance before buying, especially if you service large machinery or fittings far from an access point.
The DeWalt DCGG571B offers a 42 in hose, while the Milwaukee 2446-20 has a 36 in hose. More length can help with reach, though a long hose may take more effort to position in a crowded engine bay.

A 42 in hose may suit equipment with fittings farther from a stable place to hold the gun.
See it on Amazon
A 36 in hose adds reach for buyers comparing compact cordless options.
See it on AmazonCheck that the coupler fits your fittings and that the hose can reach without pulling the gun off balance. Our guide to greasing zerk fittings explains how to connect and pump carefully.
What common mistakes interrupt grease flow?
The usual first checks are cartridge installation, trapped air, the coupler connection and the fitting itself. These steps can help you find a setup problem before treating the tool as faulty.
If the gun runs but no grease comes out after a cartridge change, use the air bleeder valve and follow the priming instructions. If the plunger rod does not move as expected, stop and check the cartridge loading steps in the manual.
Grease around the tube can make a cartridge harder to remove or seat. Read how to change a grease gun cartridge without a mess before changing one.
If grease comes through the coupler but not into the fitting, inspect the zerk for dirt or damage. Do not keep applying pressure to a fitting that appears blocked.
How does the P3410 compare with Milwaukee and DeWalt?
The Ryobi P3410 offers 10,000 PSI maximum pressure and a 30 in hose on an 18V ONE+ platform. The alternatives change the reach, voltage platform and included items.
| Model | Maximum pressure | Hose | Key difference |
|---|---|---|---|
| DeWalt DCGG571B | 10,000 PSI | 42 in | Variable speed trigger; includes shoulder strap |
| Milwaukee 2446-20 | Over 8,000 PSI | 36 in | 12V platform; up to 7 cartridges per charge |
| Ryobi P3410 | 10,000 PSI | 30 in | 18V ONE+ platform; tool only |
| Ryobi P3410 kit | 10,000 PSI | 30 in | Includes 1.3 Ah battery and charger |
The Milwaukee is 14 in long and weighs 7.2 lb. Its stated run time is up to 7 cartridges per charge, and its battery and charger are sold separately.
The DeWalt adds a variable speed trigger, an LED and an integrated foot design for resting it on a flat surface. Choose it if the longer hose matters more than staying on the ONE+ platform.
For a direct brand comparison, see Ryobi vs DeWalt grease gun. If Milwaukee is already on your shortlist, our Milwaukee M12 vs M18 grease gun guide compares those battery platforms.
Should you choose the tool-only P3410 or the kit?
Choose the tool-only P3410 if you have a compatible Ryobi battery and charger. The kit makes more sense if you need both power items and want to start with a complete set.

The kit includes a 1.3 Ah battery and charger for buyers who need both power items.
See it on AmazonThe kit keeps the P3410's 30 in hose, 10,000 PSI maximum pressure and up to 7.5 oz./minute stated flow rate. Battery and charger style may vary, so check which version is included before ordering.
Skip either cordless model if you grease fittings only once in a while and would rather use a manual gun. For shoppers who expect regular maintenance work, choose based on battery compatibility and the reach your equipment requires.
How do you decide if the Ryobi 18V grease gun is right?
Choose the Ryobi P3410 in this Ryobi 18V grease gun review if you already own ONE+ batteries and need cordless dispensing with a 30 in hose. Choose the kit if you need a battery and charger, the DeWalt if you need 42 in of reach, or Milwaukee if its 36 in hose fits your work area.
Before buying, check battery compatibility and measure the distance to your hardest-to-reach fitting. For occasional home maintenance or other options, browse our best grease guns for home use.
Frequently asked questions
Is the Ryobi P3410 grease gun tool only?
Yes. The P3410 is sold as a tool only, so you need a compatible battery and charger separately.
It uses an 18V platform, and Ryobi says it can pump up to 19 grease cartridges per charge using a P108 LITHIUM+ battery.
How much pressure does the Ryobi P3410 produce?
The Ryobi P3410 has a maximum pressure of 10,000 PSI. Use the correct grease and fitting procedure for the equipment you are servicing.
Do not force grease into a blocked fitting.
How long is the Ryobi grease gun hose?
The P3410 has a 30 in flexible hose for reaching fittings in tight areas. For more reach, compare the DeWalt DCGG571B with its 42 in hose or the Milwaukee 2446-20 with its 36 in hose.
Does the Ryobi P3410 have a way to bleed air?
Yes. The P3410 has an air bleeder valve to help prime the pump and reduce air pockets.
If the gun will not deliver grease after changing a cartridge, follow the manual's priming steps and see our guide to bleeding air out of a grease gun.
About this guide: Our look at the Ryobi P3410 18V ONE+ grease gun draws on maker specs, materials and what owners report. See how we research.



