Ryobi PCL265 Impact Wrench Review: Worth It? (November 2026)
The Ryobi PCL265 is worth buying if you already own Ryobi 18V ONE+ batteries and need 375 ft-lbs for lug nuts and mid-size fasteners. Buy the DeWalt DCF900B instead when you need over 1,000 ft-lbs for stubborn bolts.
On this page (8 sections)
The Ryobi PCL265 is the right buy for Ryobi 18V owners who want a 1/2 in impact wrench for lug nuts, bracket bolts and light repair work. Its 375 ft-lbs of fastening torque and 3,100 impacts per minute cover everyday jobs, and the friction ring anvil makes socket changes quick.
Spend more on the DeWalt DCF900B only when you regularly face heavy, rusted or over-torqued fasteners.
This Ryobi PCL265 impact wrench review looks at what the specs mean in daily use, where the tool fits and where it falls short. It's a bare tool, so the real decision starts with the batteries you already own.
The Ryobi PCL265 at a glance
The PCL265 is a compact 18V 1/2 in impact wrench sold as a tool only. It runs on any Ryobi 18V ONE+ battery, which makes it an easy add-on for someone already in that system.
FIRE ROSE Ryobi PCL265 18V ONE+ Cordless 1/2: Best for existing Ryobi owners
- 375 ft-lbs fastening torque
- 3,100 impacts per minute
- 0 to 2,700 RPM variable speed trigger
- On-board LED worklight
A bare-tool 1/2 in impact wrench that plugs into batteries you may already own. It suits lug nuts and mid-size fasteners, not heavy rusted hardware.
Pros
- Works with all 18V Ryobi batteries and chargers
- Friction ring makes socket changes quick
- Variable speed trigger runs from 0 to 2,700 RPM
- On-board LED lights dim spots
Cons
- Sold as a tool only, so battery and charger cost extra
- 375 ft-lbs falls short of high-torque work
- Single speed setting rather than multiple modes
Three specs set the tool's place. It produces 375 ft-lbs of fastening torque, delivers 3,100 impacts per minute and runs a variable speed trigger from 0 to 2,700 RPM.
A 1/2 in anvil with a friction ring holds standard sockets, and an on-board LED lights the work area.
The body weighs about 4.2 lb and measures roughly 7 in long. That's light enough to carry around a car or along a fence line without wearing out your arm.
The housing is ABS with a powder-coated finish in Ryobi green.
The anvil takes standard SAE sockets through its 0.5 in jaw capacity. That means the same 1/2 in drive sockets you already use on a hand ratchet fit this tool.
Our score weighs specs, features and buyer feedback against what you're shopping for. For a Ryobi owner doing mid-level work, the mix of price, battery fit and usable torque is hard to beat.
Who should buy the Ryobi PCL265?
Buy it if you already own Ryobi 18V ONE+ batteries and want one more tool that shares them. The bare-tool price keeps the entry cost low when the batteries are already on your shelf.
Ryobi states plainly that the tool works with all 18V Ryobi batteries and chargers, so the batteries from a drill or a string trimmer are fair game.
It also suits light automotive work. Lug nuts on a passenger car, brake caliper bolts and suspension parts often fall within 375 ft-lbs.
The variable trigger lets you start slow and build up speed instead of hammering a fastener from the first squeeze.
Home and yard jobs fit too. Fence posts, deck hardware and trailer bolts are common targets.
The LED helps when you're working under a car or in a dim garage.
Skip it if you mostly face heavy equipment, big truck lugs or rusted bolts. Those jobs want breakaway torque in the 1,000 ft-lb range.
If that's your week, look at the DeWalt below.
If you're also outfitting a grease setup, the Ryobi 18V ONE+ grease gun review covers another tool that shares the same battery platform.
The specs that matter in daily use
Torque and impacts per minute decide what the tool can loosen. The 375 ft-lbs rating is fastening torque, the force it applies when tightening.
Loosening stuck hardware takes more, and that's where the PCL265 shows its limits.
For most car lug nuts, 375 ft-lbs is enough to spin them off and run them back on. You still finish with a torque wrench to hit the maker's spec.
The impact wrench saves time; the torque wrench sets the final number.
The 3,100 impacts per minute drive the hammer action that breaks fasteners loose. Higher impact counts mean faster removal on the bolts the tool can handle.
A lower-torque tool with a high impact count still struggles on very tight hardware.
The 0 to 2,700 RPM trigger matters more than it sounds. Starting slow keeps a socket seated and prevents rounding a bolt head.
Squeeze further and the speed climbs for removal. The top end of 2,700 RPM is brisk for a mid-torque tool and speeds up long runs of nuts on a wheel or a fence line.
The friction ring anvil holds sockets without a pin. You push a socket on and pull it off, which is quicker than a detent pin when you're swapping sizes under a car.
The LED lights the socket area. It won't replace a work light, but it helps when the bolt sits in shadow.
The 18V battery does double duty here, since the same pack that turns the motor also feeds the light.
Setting up the PCL265 for the first job
Charge a compatible 18V Ryobi battery first, then fit an impact-rated socket. The tool arrives without a battery or charger, so check what you own before the first job.
The box holds one item, the wrench itself, with no battery, charger or socket included.
Slide the battery onto the base until it clicks. Push a 1/2 in impact socket onto the anvil until the friction ring holds it.
Pull gently to confirm it's seated.
Set the socket on the fastener and squeeze the trigger slowly. Let the impacts build rather than holding full speed from the start.
For tightening, run the nut down and finish with a torque wrench at the maker's setting.
Check the socket size against the fastener before you start. A loose fit rounds corners, and an impact wrench makes that worse quickly.
Use impact-rated sockets, not chrome hand sockets, since chrome can crack under hammer action.
Keep the LED clean so it actually lights the work. A quick wipe after each job helps.
Our Craftsman V20 ratchet review covers a hand-tool option for the fasteners you'd rather turn by hand.
Care and safe use over time
Treat the PCL265 as a power tool with real torque, and it will hold up. The basics are simple: keep it dry, keep sockets seated and don't force it past its rating.
Store the tool out of rain and damp. The ABS housing and powder-coated finish handle normal shop use, but water and grit don't belong inside the motor or trigger.
Wipe dust off after jobs in dirty areas. Check the friction ring now and then; if sockets start slipping off, the ring may need attention.
Keep the anvil clean so sockets seat fully.
Let the tool do the work. Pushing hard on a fastener that won't move adds strain without helping.
If 375 ft-lbs won't break a bolt loose, a bigger wrench is the answer, not more force.
Remove the battery before storing the tool for long periods. That protects the battery and avoids accidental starts in a packed toolbox.
Watch your hands and eyes when running an impact wrench. Sockets can slip, and fasteners can fly.
Safety glasses are not optional.
If you also keep cordless tools for greasing equipment, the Ryobi vs DeWalt grease gun comparison helps you stay within one battery platform.
Where the PCL265 falls short
The biggest trade-off is torque headroom. At 375 ft-lbs the PCL265 handles light and mid-size jobs, but heavy truck lugs, rusted suspension bolts and equipment hardware often need more.
The DeWalt's 1,030 ft-lbs of fastening torque is nearly triple the Ryobi figure, and its 1,400 ft-lbs of breakaway torque is the number that matters when a bolt is seized.
It's a bare tool. Without a battery and charger in the box, the real cost depends on what you already own.
A first-time Ryobi buyer pays more than the tool price suggests.
There's one speed setting rather than multiple modes. The variable trigger gives control, but tools with dedicated modes let you lock in a gentler setting for delicate fasteners.
The DeWalt has four modes and precision wrench control; the PCL265 doesn't.
It's lighter than the DeWalt at about 4.2 lb, but that weight saving comes with less power. The DeWalt kit weighs around 11 lb, and for long sessions on heavy bolts, the extra weight of a high-torque tool buys capability.
The Ryobi's shorter 7 in body is easier to fit into tight spots, though, so the size cuts both ways.
None of these are dealbreakers for the intended buyer. They matter only if your work runs past the tool's rating.
Alternatives worth comparing
Two other 1/2 in impact wrenches sit on either side of the PCL265. One adds serious torque; the other splits the gap with a brushless motor.
DeWalt 20V MAX Cordless Impact Wrench
The DeWalt DCF900B is the pick when fasteners fight back. It produces 1,030 ft-lbs of fastening torque and 1,400 ft-lbs of breakaway torque, more than double the Ryobi's fastening figure and close to four times its torque headroom for loosening.

For rusted bolts and heavy truck lugs, its 1,400 ft-lbs of breakaway torque does what the PCL265 can't.
See it on AmazonFour speed settings and precision wrench control help prevent overtightening and fastener run-off. The precision wrench mode works in forward to stop overtightening and in reverse to stop fastener run-off.
A battery guard cushions the battery-to-tool joint to reduce wear. It ships as a kit with a battery and charger.
The housing is oil-resistant glass-filled nylon over a brushed finish in black and yellow. The 8.43 in body is longer than the Ryobi's 7 in, and the kit weight lands around 11 lb.
That's a heavier tool to hold overhead or work under a car.
The cost is weight and money. The kit price is higher than a bare Ryobi tool.
If your work stays light, that's capability you won't use. Read the full DeWalt DCF900B review for the heavy-duty case.
Craftsman V20 RP Cordless Impact Wrench
The Craftsman CMCF940M1 sits in the middle. Its brushless motor delivers 700 ft-lbs of tightening torque and 1,000 ft-lbs of breakaway torque, roughly double the Ryobi's fastening rating.
The brushless design also helps runtime and efficiency, so a charge goes further than a brushed motor would allow.

A brushless middle step for buyers who want more than 375 ft-lbs without DeWalt-level cost.
See it on AmazonIt has three speeds and a variable speed trigger, plus a hog ring anvil for quick socket changes. The kit includes a 4.0 Ah battery, a charger and a soft bag, so it's ready out of the box.
The glass-filled nylon housing suits automotive work, and the LED lights dark, hard-to-reach areas.
It's still short of the DeWalt on torque and costs more than a bare Ryobi tool. The 12.2 in body is the longest of the three.
For someone without Ryobi batteries, though, the kit value is worth weighing. Our Craftsman V20 ratchet review covers the hand-tool side of the same platform.
Verdict: buy the PCL265 for Ryobi batteries
Buy the Ryobi PCL265 if you already own Ryobi 18V ONE+ batteries and your work stays in the light to mid-size range. At 375 ft-lbs it handles car lug nuts, brake bolts and yard hardware, and the friction ring anvil and LED make everyday jobs easier.
The 3,100 impacts per minute and 0 to 2,700 RPM trigger give you enough control to start slow and finish clean.
Pick the DeWalt DCF900B instead if you regularly face heavy, rusted or over-torqued fasteners. Its 1,030 ft-lbs of fastening torque and 1,400 ft-lbs of breakaway torque give you headroom the Ryobi doesn't have.
The Craftsman CMCF940M1 is the middle choice for a kit buyer who wants a brushless motor without the top price.
The deciding question is simple: do you already have Ryobi batteries? If yes, this impact wrench review points to the PCL265 as the value pick for most home and light auto work.
If no, compare kit prices before you commit, since the bare tool needs a battery and charger to run.
Frequently asked questions
How much torque does the Ryobi PCL265 have?
The Ryobi PCL265 delivers 375 ft-lbs of fastening torque and 3,100 impacts per minute. That covers lug nuts and mid-size bolts on most cars and light jobs.
It won't loosen heavily rusted or over-torqued hardware the way a 1,000 ft-lb wrench can.
Does the Ryobi PCL265 come with a battery?
No. The Ryobi PCL265 is sold as a tool only, with no battery or charger in the box.
It works with all 18V Ryobi batteries and chargers.
If you already own Ryobi 18V tools, you can use those batteries; otherwise budget for a battery and charger.
What size sockets fit the Ryobi PCL265?
The Ryobi PCL265 has a 1/2 in anvil with a friction ring, so it takes standard 1/2 in drive sockets. The friction ring holds the socket without a pin, which makes changes quick.
Use impact-rated sockets for power tools rather than chrome hand sockets.
Is the Ryobi PCL265 good for changing tires?
Yes for most passenger cars. Its 375 ft-lbs of fastening torque handles typical lug nuts, and the 1/2 in anvil takes standard sockets.
For trucks or over-torqued lug nuts, a higher-torque wrench like the DeWalt DCF900B has more breakaway power.
How does the Ryobi PCL265 compare with the DeWalt DCF900B?
The DeWalt DCF900B is the stronger tool, with 1,030 ft-lbs of fastening torque and 1,400 ft-lbs of breakaway torque against the Ryobi's 375 ft-lbs. The Ryobi is lighter and cheaper as a bare tool.
Pick the Ryobi for light and mid-size work, the DeWalt for heavy fasteners.
About this guide: Our look at the Ryobi PCL265 18V ONE+ impact wrench draws on maker specs, materials and what owners report. See how we research.



