Best picks

9 Best Milwaukee Cordless Ratchets (November 2026)

Updated on · By the Metal Ward team

The best Milwaukee cordless ratchets include the AOBEN Cordless Electric Ratchet Wrench Set for a complete starter kit, the ADOTOCAM 3/8" Cordless Ratchet Wrench for Milwaukee for deep, narrow spaces, and the Milwaukee 2457-20 M12 3/8-inch Ratchet (best overall milwaukee ratchet).

On this page (8 sections)
  1. The best Milwaukee cordless ratchets, pick by pick
  2. How do these Milwaukee cordless ratchets compare?
  3. How were these cordless ratchets compared?
  4. What drive size should you pick, 1/4 or 3/8 inch?
  5. Do you need the high speed FUEL or the standard M12?
  6. Which 18V-battery ratchet fits a Milwaukee pack?
  7. What should you watch for in a ratchet kit?
  8. Verdict: which Milwaukee cordless ratchet is the best buy?

The best Milwaukee cordless ratchet for most buyers is the 2457-20 M12 3/8-inch, because it puts 35 ft-lbs and a 3/4-inch low-profile head into an engine bay for less than the FUEL models. Buy the 2566-20 if your work is mostly small fasteners, or the 2457-21 kit if you don't own M12 batteries yet.

A cordless ratchet is not a substitute for a breaker bar. It spins nuts and bolts in and out fast, then you finish torque by hand.

That's the whole point: less wrist work in tight spots.

This guide compares every Milwaukee ratchet here by size, speed and what comes in the box. It also covers the 18V-battery ratchets that fit Milwaukee packs, since many buyers already own those batteries.

If you want the full range beyond one brand, our roundup of the best 3/8 cordless ratchet covers the field.

Our picks at a glance

  1. 1 AOBEN Cordless Electric Ratchet Wrench Set
    Best for a complete starter kit

    AOBEN Cordless Electric Ratchet Wrench Set

    9.7/10 our score

    See it on Amazon
  2. 2 ADOTOCAM 3/8" Cordless Ratchet Wrench for Milwaukee
    Best for deep, narrow spaces

    ADOTOCAM 3/8" Cordless Ratchet Wrench for Milwaukee

    9.2/10 our score

    See it on Amazon
  3. 3 Milwaukee 2457-20 M12 3/8-inch Ratchet
    Best overall Milwaukee ratchet

    Milwaukee 2457-20 M12 3/8-inch Ratchet

    9.0/10 our score

    See it on Amazon
  1. 4Milwaukee M12 FUEL 3/8-inch High Speed Ratchet KitCheck it
  2. 5Milwaukee 2566-20 M12 FUEL 1/4-inch High Speed RatchetCheck it
  3. 6DeWalt DCF513B 20V ATOMIC 3/8-inch Ratchet

    DeWalt DCF513B 20V ATOMIC 3/8-inch Ratchet

    Best for high torque on a 3/8 drive
    Check it
  4. 7Milwaukee 2457-21 M12 3/8-inch Ratchet KitCheck it
  5. 8DeWalt DCF510B 20V XR 3/8 and 1/2-inch Sealed Head RatchetCheck it
  6. 9ACROPOW 3/8" Cordless Ratchet Wrench for MilwaukeeCheck it

The best Milwaukee cordless ratchets, pick by pick

The right pick comes down to three things: which battery platform you own, how much torque the job needs, and whether the ratchet comes as a bare tool or a kit. The order below runs from the highest score down.

1

AOBEN Cordless Electric Ratchet Wrench Set: Best for a complete starter kit

AOBEN Cordless Electric Ratchet Wrench Set, Milwaukee cordless ratchets
9.7/10Our score
  • 40 ft-lbs of torque
  • 280 RPM variable-speed trigger
  • 2 packs of 2000mAh batteries and a charger
  • 6 sockets, adapters and a carry case

Two batteries and a full socket set make this the easiest first cordless ratchet to live with. It covers most garage bolt work without a separate M12 platform.

See it on Amazon

Pros

  • Two batteries and charger included
  • Six sockets, two adapters and an extension bar
  • Side lights show remaining power

Cons

  • Heavier than the Milwaukee bare tools
  • No low-profile head to match the M12

The AOBEN set is the easiest way to get a working cordless ratchet in one order. You get two 2000mAh batteries, a charger, six sockets in different sizes, a 1/4-inch adaptor, a 3-inch extension bar and a carry case.

The package lists 14 items in all.

Its 12V motor turns out 40 ft-lbs at up to 280 RPM, which is enough for most under-hood fasteners and trim work. The variable-speed trigger gives you control on delicate bolts instead of a full-speed jolt the moment you pull.

Side lights show how much power is left, and the switch at the back of the head helps prevent accidental triggers. The air-cooled motor is built to keep battery temperature steadier during long jobs.

A polished metal body and box end head round it out.

Against the Milwaukee picks, the trade-off is the head. It's a full-size body at 12 inches long and about 2 kg, so it won't slide into the tightest engine bay corners like the M12's low-profile head.

It's also heavier than any M12 here.

Choose it if you want a complete starter set with no battery platform to pick first. Skip it if a compact head matters more than included accessories.

AOBEN Cordless Electric Ratchet Wrench SetCheck it on Amazon
2

ADOTOCAM 3/8" Cordless Ratchet Wrench for Milwaukee: Best for deep, narrow spaces

ADOTOCAM 3/8" Cordless Ratchet Wrench for Milwaukee, Milwaukee cordless ratchets
9.2/10Our score
  • 75 ft-lbs from a brushless motor
  • 5.5-inch extended neck
  • Runs on Milwaukee 18V batteries
  • Aluminum alloy housing

Its extended neck reaches fasteners the short M12 heads can't touch, and 75 ft-lbs covers stubborn nuts. You need an 18V Milwaukee battery on hand already.

See it on Amazon

Pros

  • Longest reach in this group
  • Highest torque among the Milwaukee-battery options
  • Brushless motor
  • Safety lock switch

Cons

  • Tool only, no battery or charger
  • Not made by Milwaukee

The ADOTOCAM ratchet is the reach pick. Its 5.5-inch extended neck gets the head deeper into engine compartments, behind appliances and into frame rails than the short Milwaukee bodies.

The head itself is ultra-slim and round, so it fits between parts once it's in there.

The brushless motor makes 75 ft-lbs, the second-highest torque here, and runs 0 to 250 RPM on a variable-speed trigger. A safety lock stops the trigger during storage, and a forward and reverse switch handles tightening and loosening.

The alloy housing resists impact, oils and solvents.

It runs on Milwaukee 18V batteries, so anyone already on that platform can skip a new battery purchase. The kit adds a 3/8 to 1/2 adapter, a 3/8 to 1/4 adapter, a 3-inch extension bar and a manual.

Two limits matter. It's a bare tool, so no battery or charger comes in the box.

And it is not made by Milwaukee, so it won't match M12 ergonomics or the low-profile head.

If reach is your problem, this is the one. Our guide to the extended reach cordless ratchet covers the reach-focused options in more depth.

ADOTOCAM 3/8" Cordless Ratchet Wrench for MilwaukeeCheck it on Amazon
3

Milwaukee 2457-20 M12 3/8-inch Ratchet: Best overall Milwaukee ratchet

Milwaukee 2457-20 M12 3/8-inch Ratchet, Milwaukee cordless ratchets
9.0/10Our score
  • 35 ft-lbs of torque
  • 250 RPM variable-speed trigger
  • Low-profile 3/4-inch head
  • REDLINK intelligence

The original sub-compact M12 ratchet balances power, price and a head that squeezes into engine bays. It's the Milwaukee most buyers should start with.

See it on Amazon

Pros

  • Low-profile head for tight access
  • Recessed forward and reverse switch
  • Onboard fuel gauge

Cons

  • Tool only, no battery or charger
  • Less torque than the 18V-battery options

This is the Milwaukee ratchet most buyers should own. The 2457-20 pairs a 12V motor with 35 ft-lbs and 250 RPM, then wraps it in a 3/4-inch low-profile head that fits where a full-size ratchet won't.

The forward and reverse switch sits recessed on the back of the head, so it doesn't get bumped mid-job. An onboard fuel gauge shows battery state, and the front LED lights dim work areas.

The variable-speed metal trigger and reinforced steel housing hold up to daily use.

REDLINK intelligence lets the tool talk to the M12 battery, cutting power before the motor overheats. At 10-3/4 inches and about 1.9 lb, it clips to a tool belt without dragging.

The 3/8-inch drive takes the sockets most people already own.

The trade-off is speed and torque. The high speed FUEL 3/8-inch has the same 35 ft-lbs but faster spinning, and the 18V-battery options push 70 ft-lbs or more.

The 2457-20 also ships as a bare tool, so budget for a battery.

For a first Milwaukee ratchet, this is the safe call. Read the full Milwaukee M12 ratchet review before you decide between bare tool and kit.

Milwaukee 2457-20 M12 3/8-inch RatchetCheck it on Amazon
4

Milwaukee M12 FUEL 3/8-inch High Speed Ratchet Kit: Best for shop-ready speed

Milwaukee M12 FUEL 3/8-inch High Speed Ratchet Kit, Milwaukee cordless ratchets
8.9/10Our score
  • Up to 35 ft-lbs
  • High speed brushless motor
  • Kit with 2 batteries, charger and case
  • 3/8-inch drive

The kit adds batteries, a charger and a case to the high speed 3/8-inch FUEL ratchet. Buy it if you want a complete M12 setup without buying batteries separately.

See it on Amazon

Pros

  • Two batteries and charger included
  • Light at 1.7 lb
  • Comes with a carrying case

Cons

  • Same 35 ft-lbs as the cheaper 2457-20
  • Kit adds cost if you already own M12 batteries

The M12 FUEL 3/8-inch High Speed Ratchet Kit is for buyers who want finished and ready. It ships with two M12 batteries, a charger and a case, so nothing else is needed on day one.

The kit counts as three items in the box.

The brushless FUEL motor holds 35 ft-lbs but spins faster than the standard 2457, which shortens the time spent running long bolts in and out. The 3/8-inch drive matches the most common socket size, and the powder coated finish resists wear.

At 1.7 lb it's the lightest 3/8-inch pick here, which matters on overhead work or long jobs under a dash. The kit design also means you can leave one battery on the charger while you work.

Its 11.1-inch length keeps it close to the standard M12 body.

The catch is value if you already own M12 packs. Paying for a kit you don't need makes less sense than the bare-tool 2457-20.

And it still can't match the 70 ft-lb tools for stubborn bolts.

Buy it for a shop that wants a cordless ratchet running the day it arrives.

Milwaukee M12 FUEL 3/8-inch High Speed Ratchet KitCheck it on Amazon
5

Milwaukee 2566-20 M12 FUEL 1/4-inch High Speed Ratchet: Best for small fasteners

Milwaukee 2566-20 M12 FUEL 1/4-inch High Speed Ratchet, Milwaukee cordless ratchets
8.8/10Our score
  • 1/4-inch drive
  • 450 RPM
  • Up to 40 ft-lbs of torque
  • 0.75-inch head profile

The 1/4-inch drive and 450 RPM make this the fastest ratchet here for trim, dash and small-engine fasteners. It's the wrong size for most lug nuts and suspension bolts.

See it on Amazon

Pros

  • Fastest speed in this group
  • 40 ft-lbs beats the 3/8-inch 2457
  • Compact 0.75-inch head
  • Brushless motor

Cons

  • 1/4-inch drive limits bolt size
  • Tool only, no battery

The 2566-20 is the small-fastener specialist. Its 1/4-inch drive and 450 RPM make it the fastest ratchet in this group, and up to 40 ft-lbs of torque beats the 3/8-inch 2457.

The 0.75-inch head profile is the slimmest here, so it slips into dashboards, trim panels and small-engine covers. The brushless motor keeps runtime up and heat down, and it weighs about 1.9 lb.

The powder coated finish holds up to shop wear.

This is a tool for trim, interior and light assembly work rather than suspension or lug nuts. The 1/4-inch drive simply won't take the sockets those jobs need.

It's also a bare tool, so you need M12 batteries already.

If you do, this and a 3/8-inch M12 make a useful pair: small fasteners with this one, general work with the bigger drive. The extra 50 RPM over the standard M12 adds up when you're running a lot of small screws.

Buy it if your work is mostly small bolts. Skip it as your only ratchet.

Milwaukee 2566-20 M12 FUEL 1/4-inch High Speed RatchetCheck it on Amazon
6

DeWalt DCF513B 20V ATOMIC 3/8-inch Ratchet: Best for high torque on a 3/8 drive

DeWalt DCF513B 20V ATOMIC 3/8-inch Ratchet, Milwaukee cordless ratchets
8.7/10Our score
  • 70 ft-lbs from a brushless motor
  • Glass-filled nylon housing
  • Low-profile head
  • Trigger lock

This is the highest-torque 3/8-inch ratchet here, so tough suspension and chassis bolts move without a breaker bar. It needs DeWalt 20V batteries, not Milwaukee ones.

See it on Amazon

Pros

  • 70 ft-lbs on a 3/8-inch drive
  • Trigger lock for storage
  • Glass-filled nylon housing handles solvents

Cons

  • DeWalt 20V battery platform, not M12
  • Heaviest 3/8-inch pick at 2.6 lb

The DeWalt DCF513B makes the case for high torque on a compact 3/8-inch drive. Its brushless motor produces 70 ft-lbs, enough for many chassis and suspension bolts that stall a 35 ft-lb M12.

The glass-filled nylon housing stands up to automotive oils and solvents, and the low-profile head keeps it usable in tight spots. A trigger lock prevents accidental starts in a toolbox.

A variable-speed trigger lets you match speed to the fastener.

It uses DeWalt 20V MAX batteries and chargers, so it only fits if you're on that platform. At 2.6 lb it's heavier than the M12 picks and the extra torque comes with more bulk.

The brushed finish and socket end head match the rest of the ATOMIC line.

There's no M12 compatibility here, which is the main reason a Milwaukee owner should look past it. But if you already run DeWalt 20V tools, this is the highest-torque 3/8-inch ratchet on the page.

Buy it for stronger fasteners on a DeWalt battery platform.

DeWalt DCF513B 20V ATOMIC 3/8-inch RatchetCheck it on Amazon
7

Milwaukee 2457-21 M12 3/8-inch Ratchet Kit: Best one-box Milwaukee kit

Milwaukee 2457-21 M12 3/8-inch Ratchet Kit, Milwaukee cordless ratchets
8.6/10Our score
  • 35 ft-lbs of torque
  • 250 RPM
  • M12 battery, 30-minute charger and case
  • Reinforced metal housing

This is the 2457-20 with the battery, charger and case you need to run it. Pick it if you want one order that works out of the box.

See it on Amazon

Pros

  • Battery, charger and case included
  • Same low-profile head as the 2457-20
  • Fuel gauge and LED light

Cons

  • One battery only
  • Slower than the high speed FUEL models

The 2457-21 is the same ratchet as the 2457-20 with the parts you need to run it. The box holds one M12 battery, a 30-minute charger and a carrying case, so one order gets you working.

You still get 35 ft-lbs, 250 RPM and the 3/4-inch low-profile head, plus the metal trigger and reinforced housing built for daily shop use. The fuel gauge and LED light carry over from the bare tool.

At 10.1 inches and about 1.9 lb, it's just as belt-friendly.

The difference from the FUEL kit is battery count and motor type. You get one battery here instead of two, and a standard brushed motor rather than the high speed FUEL.

The charger is rated for a 30-minute fill, so a lunch break covers a recharge.

For a single user with a charger nearby, one battery is enough. For a busy shop where the tool stays in hand all day, the two-battery FUEL kit is the better buy.

Choose this if you want a Milwaukee kit at the lowest cost and a spare battery isn't a priority.

Milwaukee 2457-21 M12 3/8-inch Ratchet KitCheck it on Amazon
8

DeWalt DCF510B 20V XR 3/8 and 1/2-inch Sealed Head Ratchet: Best for mixed 3/8 and 1/2 work

DeWalt DCF510B 20V XR 3/8 and 1/2-inch Sealed Head Ratchet, Milwaukee cordless ratchets
8.5/10Our score
  • Interchangeable 3/8 and 1/2-inch anvils
  • 75 ft-lbs and 0–300 RPM
  • Sealed head design
  • Glass-filled nylon housing

Swapping anvils turns one tool into a 3/8 and 1/2-inch ratchet, which saves buying two. It's larger and heavier than a dedicated M12, so tight engine bays favor the Milwaukee.

See it on Amazon

Pros

  • Two drive sizes in one tool
  • 75 ft-lbs and 300 RPM
  • Sealed head resists oils and solvents

Cons

  • DeWalt 20V battery platform
  • Large body for tight spaces
  • 3.1 lb

The DCF510B solves a different problem: it's two ratchets in one. Interchangeable anvils let you swap between a 3/8-inch and a 1/2-inch square drive without a second tool.

Both anvils come in the box.

The brushless motor makes 75 ft-lbs at 0 to 300 RPM, the highest torque and speed combo in this group. A sealed head and glass-filled nylon housing resist oils and solvents, and the trigger lock stops accidental starts.

Forward and reverse switching is built in, and an LED lights the work area. It runs on DeWalt 20V MAX batteries, sold separately.

The cost is size. At 3.1 lb and about 15 inches long, it's the biggest tool here and the least suited to tight engine bays.

For Milwaukee owners it's also a platform change. The upside is fewer tools in the box: one body covers the drive sizes two M12 ratchets would.

Buy it if you regularly jump between 3/8 and 1/2-inch fasteners and have DeWalt batteries.

DeWalt DCF510B 20V XR 3/8 and 1/2-inch Sealed Head RatchetCheck it on Amazon
9

ACROPOW 3/8" Cordless Ratchet Wrench for Milwaukee: Best budget 18V-battery option

ACROPOW 3/8" Cordless Ratchet Wrench for Milwaukee, Milwaukee cordless ratchets
8.1/10Our score
  • 74 ft-lbs from a brushless motor
  • 0–250 RPM
  • Fits Milwaukee 18V batteries
  • Aluminum alloy housing

It matches the ADOTOCAM on torque but trades the long neck for a compact body. Good if you already own Milwaukee 18V batteries and want brushless power for less.

See it on Amazon

Pros

  • 74 ft-lbs and brushless motor
  • Runs on Milwaukee 18V batteries
  • Safety trigger lock
  • Rubberized grip

Cons

  • Tool only, no battery
  • No extended neck
  • Not made by Milwaukee

The ACROPOW is the budget route to brushless power on Milwaukee 18V batteries. It makes 74 ft-lbs and 0 to 250 RPM, which puts it within a hair of the ADOTOCAM on torque.

The aluminum housing resists automotive fluids, and the compact body with a low-profile head fits tighter spots than the extended-neck options. A safety trigger lock and rubberized grip round out the controls.

The rubberized handle is built to cut vibration and hand fatigue over long jobs.

It's a bare tool, so no battery or charger. The 3/8 to 1/2 adapter, 3/8 to 1/4 adapter and 3-inch extension bar come in the box.

Note that it's made for Milwaukee 18V packs only and is not a Milwaukee product.

Its main trade-off against the ADOTOCAM is reach. The shorter neck won't get as deep into a frame rail, but the smaller body slips into places the long version can't.

It's also not a Milwaukee tool, so expect a different feel.

Buy it if you own Milwaukee 18V packs and want brushless torque at the lowest entry point.

ACROPOW 3/8" Cordless Ratchet Wrench for MilwaukeeCheck it on Amazon

How do these Milwaukee cordless ratchets compare?

The comparison comes down to battery platform first, then drive size and torque. The table below lines up every pick on those points.

ProductBest forDriveTorqueSpeedOur score
AOBEN Cordless Electric Ratchet Wrench Seta complete starter kit3/8 in40 ft-lb280 rpm9.7
ADOTOCAM 3/8" Cordless Ratchet Wrench for Milwaukeedeep, narrow spaces3/8 in75 ft-lb0–250 rpm9.2
Milwaukee 2457-20 M12 3/8-inch Ratchetoverall Milwaukee ratchet3/8 in35 ft-lb250 rpm9.0
Milwaukee M12 FUEL 3/8-inch High Speed Ratchet Kitshop-ready speed3/8 in35 ft-lb8.9
Milwaukee 2566-20 M12 FUEL 1/4-inch High Speed Ratchetsmall fasteners1/4 in40 ft-lb450 rpm8.8
DeWalt DCF513B 20V ATOMIC 3/8-inch Ratchethigh torque on a 3/8 drive3/8 in70 ft-lb8.7
Milwaukee 2457-21 M12 3/8-inch Ratchet Kitone-box Milwaukee kit3/8 in35 ft-lb250 rpm8.6
DeWalt DCF510B 20V XR 3/8 and 1/2-inch Sealed Head Ratchetmixed 3/8 and 1/2 work3/8 and 1/2 in75 ft-lb0–300 rpm8.5
ACROPOW 3/8" Cordless Ratchet Wrench for Milwaukeebudget 18V-battery option3/8 in74 ft-lb0–250 rpm8.1

The Milwaukee models cluster around a 12V M12 battery and 35 ft-lbs. The 2566-20 is the exception with 40 ft-lbs and a 1/4-inch drive.

The 18V-compatible tools from ADOTOCAM, ACROPOW and DeWalt push from 70 to 75 ft-lbs.

Nothing here reaches the torque of a full impact wrench, and that's by design. A ratchet's job is speed in tight spaces, not breaking rusted fasteners loose.

The speed range tells you the same story: 250 to 300 RPM on the 3/8-inch tools, 450 RPM on the 1/4-inch 2566-20.

How were these cordless ratchets compared?

We compared the picks on specs that change how the tool works day to day: torque, RPM, drive size, head profile, weight and what comes in the box.

Battery platform came first. A Milwaukee owner with a stack of M12 packs gets more value from a bare tool than from a kit with batteries they already have.

An 18V Milwaukee owner has a different set of choices.

Torque and speed came next, since they decide which fasteners the tool can run. Head profile and length followed, because access is the reason to own a ratchet at all.

Finally we weighed kit contents against price tier, so you don't pay for batteries you don't need.

Our score weighs specs, features and buyer feedback against what you're shopping for. One product keeps the same score across the site.

What drive size should you pick, 1/4 or 3/8 inch?

Pick 3/8-inch for general auto and maintenance work, and 1/4-inch only if small fasteners are most of your job. The 3/8-inch drive matches the sockets most people already own.

When 3/8-inch is the right call

The 2457-20 and the FUEL kit both run 3/8-inch sockets, which covers brake calipers, valve covers, intake bolts and most under-hood fasteners. It's the default for a first ratchet.

The DeWalt DCF513B and the 18V-battery options also use 3/8-inch drive, so your socket tray carries over.

When to add the 1/4-inch

The 2566-20's 1/4-inch drive and 450 RPM suit dash work, trim, small engine covers and light assembly. Add it as a second ratchet rather than a replacement.

When you need both in one tool

The DeWalt DCF510B swaps between 3/8 and 1/2-inch anvils, so it's the pick when your work spans both drive sizes. It costs you size and weight in return.

Do you need the high speed FUEL or the standard M12?

Buy the standard 2457 if you want the lowest cost and 35 ft-lbs is enough. Buy the high speed FUEL if faster spinning cuts job time on long bolts.

Both make 35 ft-lbs, so the difference is motor speed and kit contents. The FUEL kit also brings two batteries and a charger for buyers with no M12 platform yet.

The standard tool's brushed motor is the simpler, proven design.

If you already own M12 batteries, the bare 2457-20 is the better value. If you don't, compare the 2457-21 kit against the FUEL kit and pick by battery count rather than by motor marketing.

Our guide to the cordless ratchet for the money compares the value angle across brands.

Which 18V-battery ratchet fits a Milwaukee pack?

Three options here run on Milwaukee 18V batteries: the ADOTOCAM and the ACROPOW. None of them is made by Milwaukee.

Both are tool only, so you need a pack and charger already.

ADOTOCAM for reach

The 5.5-inch extended neck and 75 ft-lbs make the ADOTOCAM the reach-focused choice. It's the one to pick when fasteners sit deep behind other parts.

ACROPOW for a compact body

The ACROPOW matches the torque at 74 ft-lbs but drops the long neck for a smaller body. It fits tight spots the extended version can't enter.

Both are bare tools, so you need at least one Milwaukee 18V pack already. The DeWalt options are strong tools, but they need DeWalt batteries instead.

A 75 ft-lb DeWalt won't run on your M12 or 18V Milwaukee packs, so factor the platform into the decision.

What should you watch for in a ratchet kit?

Check the battery count, the charger and the case before you compare prices. A kit with one battery and a slow charger can cost more in the long run than a bare tool plus a spare pack.

Batteries and charger

The AOBEN set includes two batteries and a charger, the 2457-21 one battery and a 30-minute charger, and the FUEL 3/8-inch kit two batteries and a charger. The bare tools include none.

Match the count to how long the tool stays in your hand.

Weight and head size

A ratchet that's too heavy or too tall won't get used. The M12 bodies are around 1.7 to 1.9 lb with low-profile heads.

The DeWalt DCF510B is 3.1 lb and the longest tool here.

Every product section above names the weight and head profile from the data, so compare those lines against your tightest job before you buy. Also check the drive size against the sockets you already own, since adapters add length that can undo a low-profile head's advantage.

Verdict: which Milwaukee cordless ratchet is the best buy?

The best Milwaukee cordless ratchet overall is the 2457-20 M12 3/8-inch. It's the cheapest entry into the M12 platform, and its 35 ft-lbs and 3/4-inch head cover most engine bay and maintenance work.

Pick the 2457-21 kit if you have no M12 batteries and want one order that works. Pick the 2566-20 for small fasteners, the FUEL kit for shop speed with batteries included, and the ADOTOCAM or ACROPOW if you already run Milwaukee 18V packs and want more torque.

The DeWalt DCF510B is the pick only if you need both drive sizes and are already on 20V MAX.

Whatever you pick, finish critical fasteners with a torque wrench. The ratchet gets you there fast; the torque spec gets you there right.

Our top 3 picks at a glance

  1. 1 AOBEN Cordless Electric Ratchet Wrench Set
    Best for a complete starter kit

    AOBEN Cordless Electric Ratchet Wrench Set

    9.7/10 our score

    See it on Amazon
  2. 2 ADOTOCAM 3/8" Cordless Ratchet Wrench for Milwaukee
    Best for deep, narrow spaces

    ADOTOCAM 3/8" Cordless Ratchet Wrench for Milwaukee

    9.2/10 our score

    See it on Amazon
  3. 3 Milwaukee 2457-20 M12 3/8-inch Ratchet
    Best overall Milwaukee ratchet

    Milwaukee 2457-20 M12 3/8-inch Ratchet

    9.0/10 our score

    See it on Amazon

Frequently asked questions

Is the Milwaukee M12 ratchet worth it over a cheaper brand?

Yes if you already own M12 batteries and want the low-profile head and REDLINK protection. The 2457-20 is the cheapest way into that platform.

A cheaper 12V set makes more sense if you have no batteries yet.

What is the difference between the 2457-20 and the 2457-21?

The 2457-20 is the bare tool. The 2457-21 adds one M12 battery, a 30-minute charger and a carrying case.

The ratchet itself is the same 3/8-inch, 35 ft-lb, 250 RPM tool.

Can a cordless ratchet replace a breaker bar?

No for rusted or high-torque fasteners. These tools top out between 35 and 75 ft-lbs, well under lug nut and suspension torque specs.

Use them to run fasteners in and out, then finish with a torque wrench.

Do I need the 1/4-inch or 3/8-inch M12 ratchet?

Pick 3/8-inch for general auto and maintenance work, since it fits the sockets you already own. Pick the 1/4-inch 2566-20 for small fasteners, dash work and tight trim where the smaller head and 450 RPM help.

Can I use an 18V Milwaukee battery on an M12 ratchet?

No. M12 tools run on M12 batteries only, and 18V batteries fit the 18V-compatible ratchets from ADOTOCAM and ACROPOW.

Keep the platforms separate when you buy.

How long does an M12 battery last in a ratchet?

Milwaukee doesn't publish a runtime figure for the 2457-20, and it depends on load and battery size. The onboard fuel gauge shows remaining charge so you can swap packs before a job stalls.